Productieproces
Procesgeschiedenis
Voordelen
Rapid Prototyping
Toepassingen
Diensten
Legeringen
Toleranties
Oppervlakte kwaliteit
Contact
Home
NederlandsEnglish
Precisiewerk Zierikzee BV

SURFACE QUALITY

The surface is free of deep grooves and will be within the range of N7 to N9 (according to DIN ISO 1302).

 

Surface quality


CLA
[uinch]		 Ra
[um]		 Rz
[um]		 Rt
[um]
Machining N1
N2
N3
N4
N5
N6		 1
2
4
8
16
32		 0.025
0.050
0.1
0.2
0.4
0.8		 0.22-0.30
0.45-0.60
0.8-1.1
1.0-1.8
1.6-2.8
3.0-4.8		 0.24-0.40
0.49-0.90
0.85-1.45
1.10-2.40
1.75-3.60
3.2-60
Investment Casting N7
N8
N9		 63
125
250		 1.6
3.2
6.30		 5.9-8.0
12-16
23-32		 6.3-10.0
13.0-19.5
25-38
Sand Casting N10
N11
N12		 500
1000
2000		 12.5
25
50		 46-57
90-110
180-220		 46-48
95-130
190-250
NOTE: CLA, Ra, Rz en Rt are indicative values


Shown below is an overview of different operations and processes and the surface quality that can be reached.


There is a choice of various surface finishes/qualities within our production process:

Sandblasting with aluminium oxide

Steelblasting with Steel Shot

Beadblasting with Glassbeads

(Manual) Polishing

Standard for non-ferrous alloys, the surface is dull and relatively rough, depending on the material.

 Standard for ferrous alloys, gives a smooth and blank surface. Used if asked by the customer, the surface is smooth and relatively dull, depending on the material. Used for a very smooth and shiny surface. Disadvantage: sharp edges are flattend.